& Warning! · During body repairs, the following safety instructions and the general information and quality instruc-

911 Carrera (996) Body front & Warning! During body repairs, the following safety instructions and the general information and quality instruc- tions must be followed. => Rep. Gr. 5; ~;afety instructions [IJ Note! .The accessories in the repair area should be removed,dependingon the extent of the damage. .All straighteningwork on the body in this area must have been completed before the damagedparts are removed. No. Procedure Instructions Placingvehicleon the alignmentbench Placethe vehicle with the units installed at the rear onto the set of straighteningattachments and fasten in place. 1 Separatingspot-weldedjoints betweenthe Use the spotweld cutter to separatethe spot-weldedjoints closing panel/side members and the front of the closing panel to the side members -A, B- and the floor panel front floor panel -C- from the outside. 2 Separatingspot-weldedjoints betweenthe Separatethe spot-weldedjoints of the closing panel to the closing panel/wheel housings whee!housingsfrom the inside (luggage-compartment side) -D- with the spotweld cutter. 3 Separatingspot-weldedjoints betweenthe Separatespot-weldedjoints of the front floor panel to the front floor panel/side members side members on the left and right -E- from the outside with the spotweldcutter. 4 Separating spot welds betweenthe front Separatespot-weldedjoints of the front floor panel to the floor panel and bulkhead. bulkheadat the middle -F- with the spotweldcutter. 501055 Replacing closing panel 50-11 page 3 Printed in Germany -44,2001 c5010551