Transfercut to the spare front wheel housingsand then cut · Cut spare side members to size with the body saw and fit

911 Carrera (996) Body front Transfercut to the spare front wheel housingsand then cut to size. Cut spare side members to size with the body saw and fit in such a way that an offset of -dimension X = 50 mm- results betweenthe inner/outer side members. Removethe factory-appliedprimer on the welding areas of the spare parts -A, 8, C, D, E, F, G, H, 1-using the rotary brush. Drill or punch(with a hole punch)07 mm holes spaced 20 mm apart for plug-weldingunder shieldinggas.~ "Welding in wheel housingsand side members" in 50-17 page 6 2 Cleaningthe welding areas Removeunderbodycoating and paint layers, etc. from the welding areas of the body with a hot-airgun or rotary brush. 3 Fitting the side membersand wheel housing Fastenthe spare innner side member on the straightening in the body and fasteningthem on the attachmentfor the front-axle mountor on the straightening straighteningattachments. attachmentsfor the impact pipes (impact absorbers)and fit it in. 4 Fitting in front wall ~ 50-33 "Replacingfront wall" 5 Fitting the front floor panel in the body and ~ 50-11 "Replacingclosing panel" fastening it on the straightening attachment. 6 Fitting in wings and front lid Fit the left and right wings and fit in the front lid. => 5-37 "Diagram -body gap dimensions"