Preparingspare parts Removethe factory-appliedprimer on the welding areas of · the spare parts -A, B, C, D, E, F, G

911 Carrera (996) Body front Preparingspare parts Removethe factory-appliedprimer on the welding areas of the spare parts -A, B, C, D, E, F, G, H, 1-using the rotary brush. Drill or punch (with a hole punch)07 mm holes spaced 20 mm apart for plug-weldingwith shieldinggas. ~ "Welding wheel housing,lower shell and outer side members into the body" in 50-23 page 6 2 Cleaningthe welding areas Removeunderbodycoating and paint layers, etc. from the welding areas of the body with a hot-air gun or rotary brush. 3 Inserting outer side member,wheel housing Straighteningattachment-2- for front-axlemount or on the into the body straightening attachment-1- for the impact pipes (impact absorbers) must be screwed on for the fitting work. Fit wheel housing in the body and fasten on straightening attachment-3-. Insert spare outer side member on the inner side member. 4 Fitting in wings and front lid Fit the left and right wings and fit in the front lid. ~ Rep. Gr. 505519; Removingand installingwings ~ Rep. Gr. 552237; Disassemblingand assembling front lid 507455 Replacing wheel housing 50-23 page 5 Printed in Germany -44,2001 c5074551