No. Procedure Instructions · 1 Plug-weldingwheel housing/hinge pillar, Weldthe spare w

911 Carrera (996) Body front No. Procedure Instructions 1 Plug-weldingwheel housing/hinge pillar, Weldthe spare wheel housingto the front wall -N, 0 -with front wall and cross member under shielding an interrupted full weld under shieldinggas. gas Plug-weldthe connectionto the hinge pillar -M- and the front wall -P, L- under shieldinggas. 2 Spot-weldingthe wheel housing Spot-weldthe whee! housingto the outer side member -K-. 3 Weldingthe lower shell under shielding gas Plug-weldthe lower shell to the wheel housing -J, E, 1- under shieldinggas. 4 Weldingouter side member under shielding Spot-weldthe outer side member to the inner side mem- gas and with spot welds ber -A, D, C-. Plug-weldthe connectionto the front wall -8- under shield- ing gas. 5 Weldinginner/outer side membersand front Weldinner side member to outer side member -R- and the wall under shielding gas front wall -F- with an interruptedfull weld under shielding gas. 6 Weldingside member/support shell under Weldside members to the support shell -G- with a full weld shieldinggas under shieldinggas. Tools and materials Basic straighteningattachmentsfor 911 Carrera (996) =>Rep.Gr.3; WorkshopEquipment Nr. 7250700 Manual 2 Star gauges Nr. 127-1 =>Rep.Gr. 2.4; WorkshopEquipment Manual 4 Shielding-gasweldingdevice =>Rep.Gr. 3; WorkshopEquipment Manual 5 Multispot spotwelder =>Rep.Gr.3; WorkshopEquipment Manual 6 Pneumaticbody saw =>Rep.Gr.3; WorkshopEquipment Manual 7 Anglegrinder =>Rep.Gr. 3; WorkshopEquipment Manual 8 Oscillatingbody saw (special electrical cutter) =>Rep.Gr.3; WorkshopEquipment Manual 9 Multispotspotweld cutter =>Rep.Gr.3; WorkshopEquipment Manual 10 Holepunch =>Rep.Gr. 2.4; WorkshopEquipment Manual 11 Hot-airgun =>Rep.Gr. 3; WorkshopEquipment Manual 507455 Replacing wheel housing 50-23 page 7 Printed in Germany -44,2001 c5074551