& Warning! · During body repairs, the following safety instructions and the general information and quality instruc-

911 Carrera (996) Body front & Warning! During body repairs, the following safety instructions and the general information and quality instruc- tions must be followed. ~ Rep. Gr. 5; Safety instructions [IJ Note! .The accessories in the repair area should be removed,dependingon the extent of the damage. .All straighteningwork on the body in this area must have been completed before the damagedparts are removed. No. Procedure Instructions Cutting out closing panel and front floor => 50-11 "Replacingclosing panel" panel Placingvehicle on the alignmentbench Placethe vehicle with the units installed at the rear onto the set of straightening attachmentsand fasten in place. Separatingspot-weldedjoints between front Separatespot-weldedjoints of the front wall to the side wall/side members and wheel housings members -A- and the wheel housings -8- with the spot- weld cutter. 2 Separatingspot-weldedjoints betweenthe Separatethe spot-weldedjoints of the radiator tank to the radiator tank and front wall front wall from the inside (radiator-tankside) -C, D- with the spotweld cutter. 3 Separatingspot-weldedjoints and MIG Separate spot welds of the front wall at the bottom to the seams betweenthe front wall and side mem- side member -E- with the spotweldcutter. Grind off the bers. MIGseams joining the front wall at the sides to the side member -F, G- with the parting grinder.