& Warning! · During body repairs, the following safety instructions and the general information and quality instruc-

911 Carrera (996) Body centre, roof, frame & Warning! During body repairs, the following safety instructions and the general information and quality instruc- tions must be followed. =>Rep. Gr. 5; Safety instructions rn Note! .The accessories in the repair area should be removed, dependingon the extent of the damage. .All straighteningwork on the body in this area must have been completed before the damaged parts are removed. No. Procedure Instructions Separatingthe spot-weldedjoint between Separatethe spot-weldedjoint betweenthe outer lower the outer/inner lower side members side member and the inner lower side member -A- with the spotweldcutter. Cut through the connectionto the A-pillar-8- with the body saw. Positionthe cut so that the spare body part (outer lower side member)overlapsA-pillar by approx. 60 mm. Cut the connectionto the side section -E- with the body saw. Positionthe cut so that the spare body part (outer lower side member)overlapsthe side section by approx. 60mm. 2 Sawingthrough the web plate Cut through the web plate at the top and bottom -F, G- with the body saw. ~ Separatingthe spot-weldedjoint between Separatethe spot-weldedjoint betweenthe outer lower the outer/inner lower side members side member and the inner lower side member -C- with the spotweldcutter. 4 Separatingthe spot-weldedjoint between Separatethe spot-weldedjoint betweenthe web plate and the web plate/inner lower side member the inner lower side member -D- with the spotweldcutter. ~514555 Replacing lower side member 51-16 page 3 Printedin Germany-42. 2000 c5145551