No. Procedure Instructions · Cleaningthe welding areas Removethe factory-appliedpri

911 Carrera (996) Body centre, roof, frame No. Procedure Instructions Cleaningthe welding areas Removethe factory-appliedprimer on the welding areas of the spare part -A, 8, C, D, E- using the rotary brush. 2 Preparingspare part Removeunderbodycoating and paint layers, etc. from the welding areas of the body with a hot-airgun or rotary brush. 3 Insertingouter lower side member Insertthe outer lower side member into the body. Fitting lower side member separation point Cut through the outer lower side member, overlapping at the separationpoint, flush with the A-pillar -8- using the body saw. 4 Fitting lower side member separation point Cut through the outer lower side member,overlapping at the separationpoint, flush with the side section -E- with the body saw. 5 Setting gap Set gap between door and outer lower side member. ~ 5-37 "Diagram-body gap dimensions" 514555 Replacing lower side member 51-16 page 5 Printed in Germany -42, 2000 c5145551