996 Carrera Group 5 Body / PAGE 146
No. Procedure Instructions · Cleaningthe welding areas Removethe factory-applie
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Body centre, roof, frame
No. Procedure Instructions
Cleaningthe welding areas Removethe factory-appliedprimer on the welding areas of
the spare part -A, B, C, D, E- using the rotary brush.
2 Preparingsparepart Removeunderbodycoating and paint layers, etc. from the
welding areas of the body with a hot-air gun or rotary
brush.
3 Inserting outer lower side member Insert outer lower side member into the body.
4 Fitting lower side member separation point Cut through the outer lower side member,overlapping at
the separationpoint, flush with the side section -E- with
the body saw.
5 Setting gap Set gap betweendoor and outer lower side member.
=> 5-37 "Diagram-body gap dimensions.
514555 Replacing lower side member -Cabriolet 51-17 page 5
Printed in Germany -42,2000 c5145552
This is a source reference. Confirm exact model applicability in the original material.