996 Carrera Group 5 Body / PAGE 155
No. Procedure Instructions · Plug-weldingseat cross member under Plug-weldthe seat cross
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
No. Procedure Instructions
Plug-weldingseat cross member under Plug-weldthe seat cross member~t the front and rear -A,
$hieldinggas B- under shielding gas.
2 Plug-weldingseat cross member under Plug-weldthe seat cross member t the sides -C- under
$hieldinggas shielding gas.
3 If>lug-weldingseat cross member under Plug-weldthe seat cross member ~t the sides and middle
shieldinggas -D, E, F- under shieldinggas.
Tools and materials
MIGwelder ~ Rep.Gr.3; Work-
shop EquipmentMan-
ual
2 Angle grinder =>Rep. Gr. 3; Work-
shop EquipmentMan-
ual
3 Multispotspotweld cutter ::} Rep. Gr. 3; Work-
shop EquipmentMan-
ual
4 Hoilepunch ~ Rep. Gr. 2.4;
Workshop Equipment
Manual
5 Hot-airgun ~ Rep. Gr. 3; Work-
shop EquipmentMan-
ual
6 Ro~arybrush ~ Rep. Gr. 3; Work-
shop EquipmentMan-
ual
Spptweldcutter 07 mm Nr. 129 ~ Rep.Gr. 2.4;
WorkshopEquipment
Manual
This is a source reference. Confirm exact model applicability in the original material.