Removing side section from the body · No. Procedure Instructions

Removing side section from the body No. Procedure Instructions 6 Separate the spot-weldedjoint Separate the spot-weldedjoint betwee1 the side section of the rear window aperture. rear window aperture and the inside of the side section with the spotweld cutter. 7 Separate side section from rear Separatethe spot-weldjoint of the overlappingrear centre centre panel panel at the top using the spotweld Cut through curer. the brazed seam on the connectionto he side section with the parting grinder. 8 Separate the spot-weldedjoint Separate the spot-weldedjoint between the light housing on the light housing and the inside of the side section and the rear transverse lock panel connectionwith the spotweldJcutter. 9 Removeside section Thethe rearside centresection panel is sealed connection from the in thelig ] factory housing using to an expanded sealant. This seal is destr yed when replacing the side section and must be replaced. 53 55 55 Replacing side section 53 -15 Printed in Germany -28, 1999 996539