Inserting the side section into the body · Observe the working time of the adhesive (Item 6) & > The new part must be w

911 Carrera (996) Body rear Inserting the side section into the body Warning: Observe the working time of the adhesive (Item 6) & > The new part must be welded in within 30 minutes. Otherwisethe adh1sion of the adhesive is impaired. i Procedure Instructions 6 Apply adhesive on the wheel arch Apply the adhesive as a triangular bea1 -dimension "X" up as far as the start of the = approx. 8 mm -on the inside of th side section, side member and the water along the inner edge up as far as the s art of the side channel of the side section member and on the underside of the water channel. Referenceaddress: Teromix-6700 2-colmponent adhesiveand the Teromix processing nozzle Henkel Teroson GmbH I Postfach 10 56 20 69 0 46 Heidelberg Hans-Bunte-Str1aBe4 Telephone (06221) 7040 Fax (06221) 704585 7 Tack-weldside section under Insert side section into the body. Checr the contours and shielding gas gap dimensions. Tack-weld the side se tion under shielding gas at the separationpoints. 8 Spot-weldB-pillarand weld under Spot-weldthe B-pillarside section to the inside of the side shielding gas section. Weld the lower side member connection on the side section to the lower side member with a continuous butt weld under shieldinggas. 9 Spot-weldwheel arch and weld Plug-weld underside of lower side mem~er. Spot-weld under shielding gas wheel arch I 10 Spot-weldside window aperture Spot-weldthe side window aperture to the inside of the side section. I 53 55 55 Replacing side section 53 -19 Printed in Germany -28, 1999 996539 No.