996 Carrera Group 5 Body / PAGE 173
Inserting the side section into the body · No. Procedure Instructions
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Body rear
Inserting the side section into the body
No. Procedure Instructions
11 Spot-weldrear window aperture Spot-weldthe rear window aperture an~ the inside of
the side section. cj
12 Spot-weld light housing Spot-weldlight housingwith the conne ting angle and
the connectionto the transverse lock anel.
On the inside of the side section (smal figure), make sure
that the welding nuts are lined up with he hole pattern
in the side section. Screw in M6 hexa on-headbolts to
position. Spot-weldthe connectionwith the side section.
13 Weld B-pillar centre and C-pillar Weld B-pillarcentre and C-pillarwith a fontinuous butt weld
under shielding gas under shieldinggas. Grind the welds. I
14 Spot-weldrear centre panel and Spot-weldthe overlap of the rear centi panel at the top.
weld under shielding gas. Weld the overlap on the lower connec on of the side
section with an interrupted full weld un er shieldinggas.
53 55 55 Replacing side section 53 -21
Printed in Germany -28, 1999 996539
This is a source reference. Confirm exact model applicability in the original material.