Inserting the side section -Cabriolet into the body · Observe the working time of the adhesive (Item 6) & The new

911 Carrera (996) Body rear Inserting the side section -Cabriolet into the body Caution! Observe the working time of the adhesive (Item 6) & The new part must be welded in within 30 minutes. Otherwisethe adhtsion of the adhesive is impaired. No. Procedure Instructions 6 Apply adhesive on the inside of Apply the adhesiveas a triangular bead (dimension "X" = the water channel and on approx. 8 mm) on the inside of the s de section, along the wheel arch up as far as the water channeland the wheel arch s far as the start of the start of the side the side member. member Referenceaddress: Teromix-6700 2-c mponentadhesive and the T eromix processing nozzle Henkel Teroson GmbH Postfach 10 56 20 69 0 46 Heidelberg Hans-Bunte-SttaBe 4 Telephone (06221) 7040 " Fax (06221) 704585 I 7 Tack-weldside section under To do so, the vehicle must be standin on its wheels or shielding gas positioned on the set of straightening ttachments. Insert side section into the body. Check the ontours and gap dimensions.Tack-weldthe side sectio under shielding gas at the separationpoint. 8 Weldthe B-pillarundershielding Plug-weldthe B-pillarside section to the inside of the side gas section under shieldinggas. Weld the t ide section to the lower side member connectionwith a ontinuous butt weld under shieldinggas. 9 Spot-weldwheel arch and weld Plug-weldunderside of lower side me1 ber. Spot-weld under shielding gas wheel arch 10 Spot-weldwater channel Spot-weldinside of side section with the water channel 53 55 55 Replacing side section -Cabriolet 53 -29 Printed in Germany -33, 1999 9965323 >