During body repairs, the following safety instructions and the · general information and quality instructions must be fol-

911 Carrera (996) Body rear During body repairs, the following safety instructions and the general information and quality instructions must be fol- lowed. =>Rep. Gr. 5; Safety instructions [IJ Note! .The accessories in the repair area should be removed,depend- ing on the extent of the damage. .All straightening work on the body in this area must have been completed before the damagedparts are removed. No. Procedure Instructions Placingvehicle on the alignmentbench. Placethe vehicle with the units m unted at the front onto the set of straighteningattachme ts and fasten it in posi- tion. Separatingthe spot-weldedjoint at the rear Use a spotweld cutter to separatethe connectionbetween closing panel. the inner side members and the r ar closing panel -A- on the left and right. 2 Separatingthe spot-weldedjoint at the rear Use the spotweld cutter to separ te the connection closing panel. betweenthe side section on the in ide and the rear closing panel -B, C-. 3 Separatingthe spot-weldedjoint on the Separatethe spot-weldedjoint be een the engine mount engine mount at top. at top -D- and the inner side me ber and the connection to the inner side section -F- with he spot-weldcutter. 4 Separatingthe spot-weldedjoint on the Use the spotweld cutter to separ te the spot-weldedjoint engine mount at bottom. betweenthe engine mount at bott m -E- and the inner side member. 530555 Replacing rear closing panel -GT 3 53-39 page 3 Printed in Germany -44,2001 e5305552