Disassembling and assembling front lid · No. Designation Qty. Removal Installation

911 Carrera ( 996 ) Lids, flaps Disassembling and assembling front lid Note: No. Designation Qty. Removal Installation 1 Lid 1 Adjust lid to the hingesin accordance with the con- tours of the wings and the front spoiler. 2 Rubber buffer 2 Removerubber buffers by Screw in rubber buffers. turning them. 3 Combination screw M6 x 12 2 Tighteningtorque: 10 Nm (7.5 ftlb.) 4 Upper part of lock 1 Removeupper part of lock Fasten upper part of lock8 from lid. to the lid with the combi- nation screws and adjust to the lower part of lock. 5 Combination screw M6 x 14 10 Loosenfastening screws Lay lid on hinges and and remove lid from vehicle. screw tight. 6 Hinge left 1 Loosen combinationscrews Adjust to the left side M6 x 14 section in accordance with lid contour. 7 Hinge right 1 Loosen combinationscrews Adjust to the right side M6 x 14 section in accordance with lid contour. 8 Plug connection 1 Disconnectcable-harness Connect cable-harness plug connection. plug connection. 9 Bowden cable 1 Press Bowden cable out of Press Bowdencable into holder. holder. 10 Lower part of lock 1 Fasten lower part of lock with combination screws and adjust to upper part of lock. 11 Combinationscrew M6 x 30 1 Undo 55 22 37 Disassembling and assembling front lid 55 -3 Printed in Germany, 1997 996551