Assembling release for front lid · No. Procedure Instructions

911 Carrera (996) Lids, flaps Assembling release for front lid No. Procedure Instructions 1 Fit actuating element. Insert the actuating elementfor lid release into the support from behind and position. Then fasten with the T20 x 15 Torx screws. Connectelectrical plug connection. Plug in the electrical plug connection. 2 Fit actuating levers. Position actuating lever in the sill cover, press in 6 x 22 x 19 pin and secure with the retainer SLB 6. Engagethe tension spring 0.8 x 5.2 ~ 30 in the sill cover and engage the actuating lever. I 3 Fit bowden cables. Position bowden cable in the actuating lever and fasten with the M4 x 14 hexagon socket head bolt. Press the bowden cable sleeve into the guide of the sill cover. 4 Checkplastic Check plastic clips in the sill cover an~ replace them if clips. necessary. cc 5 Screwin hexagonsockethead The M6 x 25 hexagon socket head bolts in the support bolts. must not be screwed in by more than 3 to 4 turns. 6 Fit sill cover. Positionthe sill cover on the support and push it onto the support. l 7 Tighten hexagon socket head Tighten the M6 x 25 hexagon socket head bolts in the bolts. support through the holes in the sill cover. Press in the 8.0 x 11 x 7.2 plugs. 55 10 37 Disassembling and assembling release for front lid 55 -15 Printed in Germany, 1997 996559