Disassembling and assembling rear lid · Change in handling, the balance from the front to the rear axle is affected!& > The a

911 Carrera (996) Lid 55 Disassembling and assembling rear lid Warning: Change in handling, the balance from the front to the rear axle is affected!& > The additionalwing is set to the lowest (horizontal)position for street Iuse. Changes to the setting (to individuallymatch the personal driving style) are onl~ intendedfor the racing track. I The additionalwing must be moved to the lowest position for use in ~ublictraffic. Note: Nr. Designation Qty. Removal Installation 1 Countersunk screw 2 Tightening torque: M6 x 16 10 Nm (7.5 ftlb.) ~ the guide fitting of 2 Spoiler 1 Turn rear spoiler approx. Inse 450 upward and push the poiler into the peg forward. of t e rear lid. 3A Left bearingangle 1 Remove Inse~ in the adjustment fittin .Lowest position see: inset Observe safety instruction! in the adjustment 38 Right bearing angle 1 Remove Inse~ fittin .Lowest position see: inset Observe safety instruction! 4 Spacerwasher 4 5 Countersunkscrew 10 Tightening torque: M4 x 8.0 2.8 Nm (2 ftlb.) 6A Left guide fitting 1 68 Right guide fitting 1 7A Left adjusbnent fitting 1 78 Rightadjustmentfitting 1 55 90 37 Disassembling and assembling rear lid -GT3 55 -25 Printed in Germany. 25, 1999 9965523