fullymatted.
Back to search
996 Carrera Group 5 Body / PAGE 238

Door front, central locking system 911 Carrera (996) · Disassembling door

Add to repair workspace
Open repair workspace
Open full manual Original source
Original manual page 238
Read extracted page text

OCR can contain errors. Check the original page image for exact wording, warnings and specifications.

Door front, central locking system 911 Carrera (996) Disassembling door Danger of injury if side airbag units in the door are triggered while ignition key is not removed! .Always remove ignition key during body work, and do not commence adjustment work until a waiting period of at least 1 minute has elapsed! .The ground strap of the battery must be disconnected during work on the airbag system and alignment bench work within the framework of body repair! Damage to the bowden cable when removing door trim panel! Damage by bending the bowden cable at the hook! .Pull the hook out of the end piece only after installation in the inner door release! & Caution! Damage to plug connection lugs during door removal! Damage to lugs when pulling the plug connection out of the A-pillar! The locking element at the bottom part of the plug con- nection must be pulled out before the plug connection is disconnected! Danger of material damage if the door lock is installed incor- rectly! Malfunctions in the alarm system! .The door lock should be installed only when the actuating lever is in basic position! 575137 Disassembling and assembling door 57-5 page 2 c5751371 Printed in Germany -44,2001 .

This is a source reference. Confirm exact model applicability in the original material.