Elektrik 9119 · 9 Electrical system 911 Turbo/911 GT2

Elektrik 9119 9 Electrical system 911 Turbo/911 GT2 Seat and mirror memory via remote control Storing seat position 1. Using the key of your choice switch on the ignition. 2. Set the seat and mirror to the positions you require. If, when reversing, the front passenger-side outside mirror is to be used as a parking aid, then the reverse gear must be engaged when storing the seat position. 3. Hold down memory button "M" and addi tionally press button (next to memory button). The individual setting is now assigned to this remote control and button . Retrieving seat position Unlock car or boot using remote control. B21 008 A seat position assigned to a remote control can also be retrieved with button , if Individual seat and exterior mirror settings the respective key has unlocked the vehicle for the driver can be saved for subsequent or switched on the ignition. retrieval. The remote control detects which key is be- If no seat position is assigned to a remote ing used at any given time and sends this control, button has not function. data to the seat memory control module. This then initiates an automatic adjustment Note of both the seat and the outside rear-view mirror. Automatic seat adjustment can be aborted If a locked car is opened by means of the at any time by pressing the central locking radio remote control, the seat and the out- button, or any memory or seat adjustment side rear-view mirror move to the positions button. stored for this particular key. 4 keys, which are colour coded so one can Deleting stored seat position tell them apart, can be programmed for each car. 1. Using the key of your choice switch on the ignition. 2. Press and hold button and per- sonal button 2 simultaneously for at least 5 seconds. 9 - 24 Service Information 2002