Checking the adjustment ... · 1. Close the doors.

911 Carrera (996) Door front, central locking system Checking the adjustment ... 1. Close the doors. 2. Use a wax marker to mark the door windowalong the roof ~ strip. 3. Actuate the door handle until the windowloweringfunction is xf activated. ~{-I-- Adjustment valve for window lowering Ifunction approx. 13 -f / I I /\mm ,~::::~=--- The wax marking along the door window should be uniformly approx. 4 mm. Adjustment of the door window pressing force on the ~ door seal at the top and sides 1. Movethe power window unit rails by approx. 10 mm outwards or inwards. rn Note! The adjusting nuts of the power windowunit rails for the pressing force of the door windowupper edge against the convertibletop are accessible through two holes at the bottom of the door. Adjustment procedure: 1. Openthe doors. 2. Move the power window regulator into its upper position and undo the combination nuts M 6 of the power windowrails. 3. Adjustthe power window unit so that the upper edge of the door windowis sufficientlypressed againstthe door seal at the side Tightening torque: 10 Nm (7.5 ftlb. Checking the Clamp a sheet of paper betweenthe door windowand door seal. rn Note! It must not be possible to pullout the sheet of paper. 575137 Adjustment instructions for assembly of the door 57-6 page 5 Printed in Germany -44,2001 c5751372