Door front, central locking system 911 Carrera (996) · Adjustment of the door window contact Adjusting th

Door front, central locking system 911 Carrera (996) Adjustment of the door window contact Adjusting the lower stop of the power pressure on the door seal at the top window unit and sides I 57O_1_97 232_96 Whenreplacing the power window unit, make The pressing force of the door window upper sure that the correct position of ~helower limit edge against the convertible top is adjusted by stop is selected for the respectiv~ model. moving the power window unit rails outwards or inwards by approx. 10 mm. There are two bores lying one ab ve the other with the screwed-onlimit stops in the front The adjusting nuts of the power window unit power window unit rail. rails for the pressing force of the door window The upper limit stop must be re ved for upper edge against the convertible top are the 911 Carrera (996) model. accessible through two holes at the bottom of the door. Adjustment procedure: Open the door, move the power window unit to top position and undo the M 6 combination nuts of the power window unit rails. Adjust the power window unit so that the upper edge of the door window is sufficiently pressed against the door seal at the side. Tightening torque: 10 Nm (7.5 ftlb.) Checking the adjustment: Clamp a sheet of paper between the door window and door seal. It must not be possible to pull out the sheet of paper. 57 -20 57 51 37 Disassembling and assembling door (adjustment instructions) 9965717 Printed in Germany -21, 1999 ~