Removing sliding roof panel · Damage to rear water drainage channel or to the sliding roof mechanism when

911 Carrera (996) Sliding roof Removing sliding roof panel Warning: Damage to rear water drainage channel or to the sliding roof mechanism when the sliding roof panel is removed and when moving the trim of the sliding/tilting& roof (Item 4) > The sliding roof frame must not be moved to the "Open"position when the sliding roof panel has been removed. The trim of the sliding/tilting roof (Item 4) must be shifted without the use of force. No. Procedure Instructions 1 Open sliding roof panel Open the sliding roof panel approx. 80 mm. 2 Unclip sliding/tilting roof trim Disengage(press)trim of sliding/tilting roof out of the left and right-handfront catches towards the rear and out of the drivers, and push back by approx. 30 mm. 3 Move sliding roof panel Close the sliding roof panel and move to tilting position to tilting position 4 Sliding/tilting roof trim Push trim of sliding/tilting roof back evenlyon the left and right as far as it will go. 5 Closeslidingroof panel Move the sliding roof panel to zero position (closed) 6 Removesliding roof panel Unscrewfastening screws T25 M5 x 8 from the sliding roof panel and remove the panel from the sliding roof frame. 60 40 19 Removing and installing sliding roof panel 60-3 Printed in Germany -17, 1998 996601