Removing frame for sliding roof · The roof lining (Serv. No. 70 84) must be removed before removal of the frame for the sliding r

911 Carrera (996) Sliding roof Removing frame for sliding roof The roof lining (Serv. No. 70 84) must be removed before removal of the frame for the sliding roof. No. Procedure Instructions 1 Pullingoff water drainhoses Disconnectwater drain hoses at the front and rear from the connection points of the frame for the sliding roof. 2 Disconnecting electrical plug Press the locking tabs (arrow A) on both sides. connection Disconnectthe electrical plug connection. Note: > In order to remove the frame for the sliding roof from the vehicle, move both seats back and tilt the backrests slightly. 3 UndoingTorx screws at the sides Undo M6 x 16 oval-headTorx screws at the sides of the frame for the sliding roof. 4 Undoing Torx screws at front Undo the M6 x 25 oval-headscrew (A) at the front of the frame for the sliding roof or the M6 x 16 oval-headscrew (8) at the side of frame for the sliding roof. Then remove the frame from the passenger compartmentthrough the door aperture. 60 28 19 Removing and installing frame for sliding roof 60 -15 Printed in Germany -34, 1999 9966013