Installing frame for sliding roof · No. Procedure Instructions

911 Carrera (996) Sliding roof Installing frame for sliding roof No. Procedure Instructions 1 Fitting frame for sliding roof Insert the frame for the sliding roof through the door aperture into the passenger compartment and position it at the screw-mountingpoints at the front and sides of the roof. Fastenthe roof frame at the sides with M6 x 16 oval-headscrews (8) and at the front with M6 x 25 oval-headscrews (A). Tightening torque 7.5 Nm (5.5 ftlb.) 2 Fitting Torx screws at front Tighten the M6 x 25 oval-headscrew at the front of the frame for the sliding roof. Tightening torque 7.5 Nm (5.5 ftlb.) 3 Connectingelectrical plug Plug in the electrical plug connection. The locking tabs connection (arrow A) must engage on both sides when the connectionis made. 4 Attaching water drain hoses Attach water drain hoses at the front and rear from the connection points of the frame for the sliding roof. 60 28 19 Removing and installing frame for sliding roof 60 -17 Printed in Germany -34. 1999 9966013