996 Carrera Group 6 Body Equipment, Exterior / PAGE 41
Disassembling frame for sliding roof · > The frame for the sliding roof must be removed before the frame for the sliding roof lid
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Sliding roof
Disassembling frame for sliding roof
Note:
> The frame for the sliding roof must be removed before the frame for the sliding roof lid
can be replaced. See ServoNo. 60 14 19
The following parts must be removed from the old sliding roof frame and installed on the
new sliding roof frame:
Lifting/sliding roof drive, draught deflector, frame clips
No. Procedure Instructions
1 Removing draught deflector Fold the draught deflector up, press it inwardsand out of
the guides at the left and right sides and pull it out.
2 Removingframe clips Press in the left and right tabs of the frame clip (A),
3 Lifting/sliding roof drive Unscrewboth Torx T25 M5 x 25 fastening screws and pull
the lifting/sliding roof drive down and off the teeth.
See: ServoNo. 60 14 19
60 28 37 Disassembling and assembling frame for sliding roof 60 -21
Printed in Germany. 34, 1999 9966019
This is a source reference. Confirm exact model applicability in the original material.