996 Carrera Group 6 Body Equipment, Exterior / PAGE 43
Assembling frame for sliding roof · No. Procedure Instructions
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Sliding roof
Assembling frame for sliding roof
No. Procedure Instructions
Fittingframeclips Press the frame clips (A) in until the left and right tabs
engage.
2 Fitting lifting/sliding roof drive Position lifting/sliding roof drive into the teeth of the frame.
Screw in and tighten the T25 M5 x 25 Torx screws.
Tightening torque: 6 Nm (4.5 ftlb)
See: ServoNo. 60 14 (19/15) Removing,installing and
re-teachinglifting/sliding roof.
3 Fittingdraughtdeflector .Press the draught deflector in on the left and right and
insert it into the guides at the sides. Fold up the draught
deflector.
60 28 37 Disassembling and assembling frame for sliding roof 60 -23
Printed in Germany -34, 1999 9966019
This is a source reference. Confirm exact model applicability in the original material.