996 Carrera Group 6 Body Equipment, Exterior / PAGE 50
& Caution! · Damage to or destruction of the tension bow seal. During the procedure convertible top in service posi-
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Convertibletop, hardtop
& Caution!
Damage to or destruction of the tension bow seal. During the procedure convertible top in service posi-
tion
.Proceed according to procedure No.1 in order to avoid damage to or destruction of the tension bow
seal!
No. Procedure Instructions
Convertibletop in service position Move convertible top rearward by means of the electric
motor until the convertible-topcompartment lid has
reachedthe rear limit position. Move convertible top for-
ward by means of the electric motor until the convertible-
top compartmentlid movesforward. Then interrupt closing
operation~Disengageleft and right tension cables and fold
up the tension bow. The convertibletop must no longer be
electricallyoperated in this position.
2 Removingside-panellining Removeseat cushionsand belt cover; undo B 4.2 oval-
head screw. Loosenholding pegs with Allen key St6. Undo
the Torx screws of the loudspeakerand the cross-recess
screw beneathit.
Press out the windstop collar using a plastic spatula. Lift
up side-panellining and remove towards the front.
3 Detachingdrivelever Press out upper retainingclip SBL10 of the drive lever.
=> Removaltool; Rep. Gr. 2.4, Nr. 131; Workshop Equip-
ment Manual
4 Removingspray protection Pull the spray protection upwardsout of the chamber in
the water collectiontray.
610119 Removing and installing convertible top 61-1 page 7
Printed in Germany -41,2000 c6101191
This is a source reference. Confirm exact model applicability in the original material.
