No. Procedure Instructions · Checking assemblyaids Ensurethat the assemblyaids

911 Carrera (996) Convertibletop, hardtop No. Procedure Instructions Checking assemblyaids Ensurethat the assemblyaids are seatedfirmly. The assemblyaids must be recalibrated if they were removed. ~ Rep. Gr. 610115; Adjusting Cabrioletconvertibletop. 2 Placingconvertibletop on the vehicle Positionconvertible-topsupports in the assemblyaids, and place the convertible-toppegs of roof frame 1 into the con- vertible-toppeg housing in the cowl-panelframe. 3 Fitting rear side windowinner seal Insert rear side window inner seal together with the belt guide section, and tighten M6 hexagon nut on the converti- ble-topsupport. Pushthe deflection lever into the belt guide section, position the belt on the deflection lever and fasten with the M8 x 20 hexagon-headbolt. Tightening torque 50 Nm (37 ftlb.). 4 Screwingconvertibletop on the inner side Fastenthe left and right convertible-topsupports with the section M8 x 35 hexagon-headbolts and M8 nut. Tighteningtorque 23 Nm (17 ftlb.). 5 Disconnectingthe electrical plug connection Join the electrical plug connection of the potentiometerfor the convertible-topsupport and the convertible-toplatch micro switch. - 610119 Removing and installing convertible top 61-1 page 11 Printed in Germanv-41.2000 c6101191