996 Carrera Group 6 Body Equipment, Exterior / PAGE 65
No. Desi2nation Q~- Removal Installation · 24 Gasket 1
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Convertible top, hardtop
Note:
No. Desi2nation Q~- Removal Installation
24 Gasket 1 Push on
25 Torx screw T30 M6 x 30 2 Tightening torque
9.7 Nm (7.0 ftlb.)
26 Torx screw T30 M6 x 12 2 Tightening torque
9.7 Nm (7.0 ftlb.)
27 Clip SLB 4 2 Removaltool: referto
Workshop Equipment
Manual,Chapter2.4,
No. 131.
28 Drive Undo collar nut (Item 5) and Position drive in the
Torx screws (Items 25 and centre of the frame and
26), and remove the drive fasten with the collar nuts
(Item 5). Position Torx
screws on the
mechanicaldrive on the
right and left, and tighten
the screws with a
tightening torque of
9.7 Nm (7.0 ftlb.)
29 Expanding rivet 2 Unscrewthreaded plug and Press in and screw in
remove threaded plug
30 Flap
31 Torx screw T M6 x 2 Position locking hook in
the body and screw down
32 Lockinghookwith bowden 1 Loosen bowden cable at Insert nipple in the drive
cable the hexagonnut and lift (Item 28), and set
nipple out of the drive threaded spindle free of
play with the hexagon nut
33 Hexagon-headbolt 2
34 Fasteningelement
61 90 19 Removing and installinjg convertible top compartment lid 61 -21
Printed in Germany -34, 1999 9966117
This is a source reference. Confirm exact model applicability in the original material.