61 96 19 Removing and installing convertible-top control module · Removal Removal

911 Carrera (996) Convertible top, hardtop 61 96 19 Removing and installing convertible-top control module Removal Removal Move the convertible top to service position 3. Removecontrol module, disengage before removing the control module. the electrical plug housing (arrow A) to the right, and pull it down and off. Press plug connection (arrow B) together 1. Move convertible top rearward by means and pull it down and off. of the electric motor until the convertible-top Disengageplug connection (arrow C) toward compartment lid has reached the rear limit the upper right, and pull it down and off. position. Move convertible top forward by means Installation of the electric motor until the convertible-top 1. Join electrical plug connections(arrow C) compartment lid moves forward. and engage the locking lever downward. Then interrupt closing operation. Join plug connection (arrow B). Join plug connection (arrow A), and press 2. Disengage left and right tension cables the plug housingto the left until it engages. and fold up the tension bow. Lay lines carefully(do not trap). The convertible top must no longer be electrically operated in this position. 2. After installation of a new control module, the control module must be recalibrated 3. Bend cover over the control module rearward with the Porsche System Tester 2. and unscrew the two cross-recess screws. 118_98 61 96 19 Removing and installing convertible-top control module 61 -65 Printed in Germany -7, 1998 9966159