996 Carrera Group 6 Body Equipment, Exterior / PAGE 150
Convertible top, hardtop 911 Carrera (996) · No. Procedure Instructions
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Convertible top, hardtop 911 Carrera (996)
No. Procedure Instructions
18 /' ,. '" Fitting styling frame, roof frame 3.
Fasten draught deflector on the front face of the styling
frame using the TI5 3.5 x 8 Torx screws.
Tightening torque 1.7 Nm (1.5 ftlb.)
Position styling frame on roof frame 3 and fasten with the
TI5 M3 5 x 8 Torx screw.
Tightening torque 1.7 Nm (1.5 ftlb.)
3OO_S_~
19 Fitting fabric guide plate and styling frame on roof frame 2.
Fasten fabric guide plate on the styling frame with the
T15 3.5 x 8 Torx screws.
Tightening torque 1.7 Nm (1.5 ftlb.)
Position styling frame on roof frame 2 and set the gap
A: 3.1 + 0.5 mm between styling frame, roof frame 3
and styling frame, roof frame 2. Tighten Torx screw
T30 M6 x 20.
Tightening torque 9 Nm (6.5 ftlb.)
3OO_T_98
20 Fitting drive lever.
Position drive lever on the main bow and secure with
the retaining clip SLB 10,
Removaltool: refer to Workshop EquipmentManual,
Chapter 2,4, No, 131,
61 -112 61 30 55 Replacing convertible-top frame
9966199 Printed in Germany -33, 1999
~
This is a source reference. Confirm exact model applicability in the original material.