61 92 31 Converting hinge for convertible top compartment lid (cabriolet) · A technical modification on the hinge for

911 Carrera (996) Convertible top, hardtop 61 92 31 Converting hinge for convertible top compartment lid (cabriolet) A technical modification on the hinge for 2. For instructions on removing the additional the convertible top compartment lid was flap, see: ServoNo. 61 91 introduced in production in June 1998. This modification involves repositioning of the operating pin on the lever arm of the hinge for the convertible top compartmentlid, and the additionalflap now moves differently. For the purpose of repair or replacement capability of the additional flap, it is necessary to reposition one of the operating pins on the hinge for the convertible top compartment lid in the case of vehicles with the old additional flap: Up to Vehicle Identification Number 493_98 99 ZWS 64 08 13 RoW 99 7XS 65 07 08 USA. 3. Place drilling template on the two operating pins. Make sure that the smaller bore of the drilling template faces up and the inscription (single letter) is allocated to the correct side. Use drilling template 9644 (special tool) (R = right or L = left.) The template must be to position the new operating pin. fitted with the appropriate letter on the inner The drilling template can be used for side opposite the lever arm of the hinge. Drill the left and right sides. a 0 4.0 mm through-holein the lever arm. Procedure: 1. Convertibletop service position, see: ServoNo. 61 01 19 61 92 31 Converting hinge for convertible top compartment lid (cabriolet) 61 -129 Printed in Germany -21, 1999 99661129