No. Designation Qty. Removal Installation · 12 Panel 1 Cut off pegs

Note: No. Designation Qty. Removal Installation 12 Panel 1 Cut off pegs on the inside. (Replace) Clip into the front spoiler. 13 Cap 14 Collarnut 11 15 Support, left and right Undo collar nut M6 (Item Clip support into retaining 14), and unclip support strip on the left and from retaining strip on the (right) and tighten collar left and (right), nut M6 (Item 14) on the side member. 16 Retainingstrip, right 1 Undo the collar nut M6 Fix retaining strip on the (Item 29) and the sheet wing upward to the stop metal screw St 4.8 x 19 and fasten with the collar (Item 7) from the retaining nut M6 (Item 29) and the strip. sheetmetal screw St. 4.8 x 19 (Item 7). 17 Retaining strip, centre 1 Undo the collar nut M6 Fix the centre retaining (Item 14) and remove the strip to the transverse centre retaining strip lock panel and fasten with the collar nuts M6 (Item 14) 18 Retainingstrip, left 1 Undo the collar nut M6 Fix retaining strip on the (Item 29) and the sheet wing upward to the stop metal screw St 4.8 x 19 and fasten with the collar (Item 7) from the retaining nut M6 (Item 29) and the strip. sheetmetal screw St. 4.8 x 19 (Item 7). 19 Hexagon-headbolt 2 M12 x 1.5 x 100 63 -4 63 15 19 Removing and installing front spoiler 996631 Printed in Germany -2, 1997 1