Removing and installing rear spoiler · Damage will result if deformed heat shields are fitted /it:-

911 Carrera (996) Bumpers Removing and installing rear spoiler Caution! Damage will result if deformed heat shields are fitted /it:- l..~ Damaged or distorted heat shields must be straightened or replaced Note: No. Designation Qty. Removal Installation 1 Countersunk screw 4.8 x 15 4 Undo and remove the cover Fix the cover moulding moulding and tighten the countersunk screws 2 Cover moulding 1 Fix cover mouldingwith rear end on the retaining strip (Item 25) and fasten with countersunk screw 4.8 x 15 (Item 1) 3 Oval-headscrew 4.8 x 15 8 Removefrom rear spoiler Fix sheetmetal nut (Item 5) with rear spoiler and tighten sheetmetal screw 4 Spacersleeve5.2 x 14 6 5 Sheetmetalnut 8 6 Oval-headscrew 4.8 x 15 2 7 Washer 2 8 Pop rivet A3.2 x 7.9 4 Drill open riveted connection of the strip (Item 9) to the rear spoiler (Item 13) with a 0' 3.2 mm drill bit 9 Strip 1 Remove Fix strip on rear end and rivet with pop rivet A3.2 x 7.9 10 Sheetmetalscrew 4 St4.2x16 63 55 19 Removing and installing rear spoiler 63 -9 Printed in Germany -31, 1999 996637 >