Additional instructions for replacing the rear spoiler · Vehicles with ParkAssistent USA model

911 Carrera (996) Bumpers Additional instructions for replacing the rear spoiler 361_99 Vehicles with ParkAssistent USA model Note: Additional holes must be drilled for the Note: Additional cut-outs must be made for the ParkAssistentsensors in the rear spoiler before impact horns in the rear spoiler before this this component is painted. componentis painted. Drill holes in accordance with the markings 1. Saw out cut-outs "C" in accordance with the inside the rear spoiler. markings inside the rear spoiler. 1. Drill holes "A" with 0 6 mm, 2. Enlarge holes "8" to ~ 35 mm using a stepped drill or a centre bit. 3. Check holes by putting on a disc of the ParkAssistentsensor or by inserting the sensor. 4. Rework the holes if necessary. 63 55 19 Removing and installing rear spoiler 63 -12/1 Printed in Germany -31, 1999 996637