Removing and installing front spoiler · The wheel housing liners Servo No. 50 56 must be partially detached at the front

911 Carrera (996) Bumpers Removing and installing front spoiler The wheel housing liners Servo No. 50 56 must be partially detached at the front before the front spoiler can be removed. Note: No. Desi nation .Removal Installation 1 Hexagon cap nut 4 Turn and remove 2 Cover 1 Fixthe coverandturn the hexagoncap nuts. 3 Spacersleeve5.2 x 14 2 4 Countersunkscrew 4.8 x 19 2 Undofrom the front end Screw down in the centre of the retainingstrip. 5 Direction indicator light 1 Press in spring clip at the Connectelectrical plug side and pull out direction connection,insert lugs indicator light; disconnect and clip in the direction electrical connection. indicator light. 6 Ventilationholder Position front spoiler and (for the headlights) ventilationholder on the body and fasten with the sheetmetal screw St 4.8 x 19 7 Sheetmetal screw 8 St4.8x19 8 Spacersleeve5.2 x 14 4 9 Frontspoiler 1 On the front spoiler, undo Attach the front spoiler to the sheetrnetalscrews the retaining strip and St 4.8 x 19 (Items 7, 8) fasten it with the from the retaining strips on sheetmetal screw the left and right. Remove St4.8x 19 front end. 10 Sheetmetalnut St 4.8 17 Adjust the sheetmetal nut, centre hole 11 Front lip 1 Pull out the retaining pin of Position front lip on the the body-boundrivet. front spoiler and affix with the body-boundrivets. Push in the retaining pins of the body-boundrivets. 63 15 19 Removing and installing front spoiler -GT3 63 -15 Printed in Germany -25, 1999 9966313 1