Installing side window · No. Procedure Insuuctions

911 Carrera (996) Glazing, window control Installing side window No. Procedure Insuuctions 1 Fitting aluminiumsection and rubber Rivetaluminiumsection to the side section with the tubular covering. rivets .0 4.0 x 6.3. Wet rubber c:overingwith soapy water and insert in the aluminiumsection. 2 Fittingrubbersectionon inside. Push the rubber section onto the seam of the side section all around. 3 Fitting side window. Insert the side window, position it and fasten the side win- dow at the rear with the hexago~head bolt M6 x 12. 4 Adjusting side window at front. Fit the lock nut M8. Use the aft 4 Allan key to adjust the ad- justing elements ot the side wirnjow with respect to the door windowcontour. Tighten lock nut M8. 5 Clipping in C-posttrim. Positionand clip in the C-posttrim. 6 Fitting sash guide mount and Insert the B-posttrim at bottom, press in the two clips at B-post trim. the top and fasten with the B 4.2 x 25 cross-recess screw. 7 Fittingthe sashguidecover. Positionthe hexagon-headbolt of the sash guide mount and tighten. Tightening torque: 50 Nm (37 ftlb.) Fit the sash guide cover. 8 Fitting the clothes hook bracket. Push on the clothes hook bracket. 64 75 19 Removing and installing side window 64 -13 Printed in Germany, 1997 996647