Removing flexible rear window of Cabriolet · The tension bow seal can be damaged or destroyed;

Removing flexible rear window of Cabriolet Warning: The tension bow seal can be damaged or destroyed; move the convertible top to service position during this work!& > Important: Observethe "Convertibletop service position" procedure in order to avoid damage or destruction of the tension bow seal. See: ServoNo. 61 01 19 No. Procedure Instructions 1 Relievingconvertibletop Open convertibletop and jam the spacer wedge betweenthe windscreenframe and roof frame. Dimension approx. 300 mm 2 Opening headliner Open the headlinerzipper on all sides. 3 Connectingpowercord and Bend out contact ends of the wire strands. heatingthe adhesive Wire strands must not be crossed! Connectpower cord to the wire strands as close as possible to the convertibletop covering. The red LED will light up for approx. 5 seconds when the operating voltage is connected;this permits a polarity test. Press button of the switching clock to initiate the hot-melt process. The timer (2 minutes) set in the switching clock ends automatically.The green LED is lit during the welding process. 4 Detachingrear window Use a plastic spatula to detach the rear windowfrom the convertibletop covering on all sides. 5 Removing rear window Insert awl into zipper on the left, centre area, and undo the zipper on all sides. Removeraised adhesiveresidues from the convertibletop covering. Adhesiveresidues that adhere uniformlyon the convertibletop can be left in place.