64 54 19 Removing and installing power window motor · 1. Closedoor window.

911 Carrera (996) Glazing, window control 64 54 19 Removing and installing power window motor Removal 1. Closedoor window. Warning:& Airbag could inflate. Danger of injury or damage during fitting > 1. Removeignitionkey. > 2. Disconnectand cover the negative terminal of the battery. > 3. After the battery is disconnected, assemblywork 056_99 or work on the vehicle may be started after a waiting period 4. Press the power window unit out of the inner of 1 minute. door panel until the fastening pins are free. 2. Removedoor panel and loudspeakerunit. 5. Unlock and remove the electrical plug Carefullyremove (do not crack) the front connectionon both sides. moulded foam part from the inside of the door near the power window motor and the 6. Unscrewfastening pins of power window loudspeaker cut-out. Disassemblingand motor. Removepower window unit from the assembling door trim panel, see Servo toothing and take out through the loudspeaker No. 705937. cut-out. 3. Removefastening nuts (3 M6 nuts)from the power window motor. 64 54 19 Removing and installing power window motor 64 -51 Printed in Germany -23, 1999 9966451