996 Carrera Group 6 Body Equipment, Exterior / PAGE 251
Removing roof joint strip · No. Procedure Instructions
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Exterior equipment
Removing roof joint strip
No. Procedure Instructions
1 Unclip roof joint strip Lift at both ends using a plastic spatula and
unclip all the way along.
2 Pull off roof joint seal Pull the roof joint seal out of the groove
of the roof joint strip.
3 Uncliproof joint clips On the outside of the roof joint clip and roof joint strip,
insert a narrow screwdriver in the center and press the
screwdriver outward until the roof joint clip disengages.
4 Unclip fold-out element Insert a screwdriver beneath both ends
of the fold-out element, and lever out.
5 Detach spreader Insert a plastic spatula into the wedge piece
of the spreader and push. Removethe spreader.
6 Removeinterior trim parts Lift up the clothes hook bracket at the bottom
with a plastic spatula and pull off.
Pull awaythe A and C-pillartrim and remove.
7 Detachthe roof liner Unclip the metal strut of the roof liner from the plastic clips,
8 Detach base plate Unscrewhexagon socket head bushing aff 8
of Roof Transport System. (micro-encapsulated).
Removethe base plate from the roof channel.
66 36 19 Removing and installing roof joint strip 66 -7
Printed in Germany -6, 1997 996665
This is a source reference. Confirm exact model applicability in the original material.