Installing roof joint strip · No, Procedure Instructions

911 Carrera (996) Exterior equipment 66 Installing roof joint strip No, Procedure Instructions 1 Fit base plate The contact surface of the base plate must be free from of Roof Transport System dirt and grease. Positionthe base plate of the Roof Transport System in the roof channel parallel to the roof channel.Insert the hexagon socket head bushing aff 8 {micro-encapsulated}and tighten to a torque of 35 Nm (26 ftlb.). Seal the base plate in the roof channel all the way round with sealant{Porschepart}. 2 Attach roof liner Push the metal strut of the roof liner into the plastic clips. 3 Fit interior trim parts Position and clip in A and P-pillartrim. Fit the clothes hook bracket. 4 Fit spreaders Position 5 spreaders per roof channelin the recesses, beginning at the front. Press the spreader right down into the roof channel,and push the wedge piece into the spreader until the latter is braced in the roof channel. 5 Fit roof joint seal Push the roof joint seal onto the roof joint strip all the way round. 6 Clip in fold-outelements Position the fold-out element in the cut-out of the roof joint strip, and press in the lugs at the ends until they lock into place. 7 Clip in roof joint clips Insert the roof joint clips narrow side first and press in until the lug in the center locks into place. 8 Fit roof joint strip Position the roof joint strip over the roof channel,and align the roof joint clips in the roof joint strip with the spreaders so that they lie directly above one another. Push on the roof joint strip. 66 36 19 Removing and installing roof joint strip 66 -9 Printed in Germany -6, 1997 996665