Bonding on the interior rearview mirror · Bonding the assembled interior mirror onto the windscreen

911 Carrera (996) Interior equipment Bonding on the interior rearview mirror Bonding the assembled interior mirror onto the windscreen No. Procedure Instructions Mark the position of the interior Mark the position of the bonding plate on the outside of mirror the windscreen. Dimension A = 633 mm Dimension B = 100 mm Removeadhesive residues Removeadhesive residuesfrom the windscreen mechanicallyusing a scraper. Removeadhesive residues on the bonding plate of the interior mirror mechanicallyusing a scraper. 2 Sand the bonding plate of the Sand the bonding plate of the interior mirror flat interior mirror flat mechanicallyusing 100 grain sandpaper. Clean the bonding plate of the Cleanthe bonding plate of the interior mirror with interior mirror cleaning solution (A). Cleanthe bonding area on the Cleanthe bonding area on the windscreenwith cleaning windscreen solution (A). 3 Mask the bonding area on the Mask the bonding area on the windscreenwith primer windscreen template (cover film C). The marking for the position of the interior mirror must be visible in the center of the primer template. 4 Prime the bonding area on the Prime the masked bonding area on the windscreen thinly windscreen and evenly using primer (B). Note Observe a drying period of 15 -20 minutes. 68 27 13 Bonding on the interior rearview mirror 68 -7 Printed in Germany, 1997 996681