Group 2 · Engine electronics / PAGE 27Open full manual
No. Procedure Instructions · 10 Fitfiller neck To facilitate installation,apply
Add to repair workspace
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
No. Procedure Instructions
10 Fitfiller neck To facilitate installation,apply a thin coat of engine oil
on the indicated area (arrow).
Removeprotective cap.
Carefullypush the filler neck into take-up flange on the fuel
tank. Turn the filler neck anticlockwiseby approx. 45°.
13 Fit seal Fit seal in correct position. Ensure that the locking tabs are
seated correctly. Fastenthe hexagon-headbolt. Coat seat
of the cap seal with Vaseline.
14 Bleedcoolantsystem Lift bow on bleeder valve, fill in coolant and bleed
the system; refer to page 19 of Group 19,
ServoNo. 1938 17.
Perform tightness test.
Perform suspensionalignment.
20 -24 20 10 19 Removing and installing fuel tank
9962015 Printed in Germany -21, 1999
This is a source reference. Confirm exact model applicability in the original material.