Passenger protection 911 Carrera (996) · Installation Sensor for side airbag uni

Passenger protection 911 Carrera (996) Installation Sensor for side airbag unit Left/right identification of the side airbag unit Note Inscription R = Right door Sensors for triggering the side airbag unit are fastened on the inner lower side member on the Inscription L = Left door left and right-handsides in the vehicle. Locking pin (Figure A) must always point to the rear! Removal The wire connection point (Figure B) must 1. The cover strip and the support on the lower alwaysface the front! side member must be removedfirst. Fasteningclip M5 (Figure C) always to the rear! c I~ '\ 1~_97 2. After an accident, the sensor of the triggered 050_97 side airbag unit must be examinedfor damage. 1. The cover film behind the side airbag unit Note must not be damaged (protects againstwater The sensor must be replaced after the airbag leaking in). has been triggered for the third time. 2. Install airbag unit with the inscription "R"in the right-handdoor and fasten. Engage electrical plug connection. 3. Tightening torque for fastening screws (4 screws M6 x 16): 10 Nm (7.5 ftlb.) (1 screw M5 x 10) : 6 Nm (4.5 ftlb. Reinstall door trim panel. 69 -20 69 63 19 Removing and installing the side airbag unit 996691 Printed in Germany -38, 1999 B