Passengerprotection 911 Carrera (996) · Removing and installing roll-over protection system

Passengerprotection 911 Carrera (996) Removing and installing roll-over protection system Safety instructions for work on the roll-over Warning:protection system & I Danger of injury during work on .the roll-over protection system It is impermissible to perform repairs on the roll-over bar modules. > Removethe roll-overbar modules only after the roll-over bar has The roll-over bar modules must be been extended(triggered), replaced in the event of visible damage or pressure marks. After assemblywork on the roll-over protection system -but at least every Warning:& 2 years -the function of the roll-over I Danger of injury during work on protection system must be tested by .the roll-over protection system triggering it via the diagnostic interface. > The movementrange of the roll-over protection system must be kept clear. Work on the roll-over protection Perform the function test on the roll-over protection system only if: system must be performed only with the ignition key withdrawn. the hardtop is removed Important: Do not begin the convertible top is lopen the caps are removed. assemblywork until after a waiting time of 1 minute has elapsed. Tools or other objects must not be placed in the extensionarea of the roll-over protection system. 69 -22 69 72 19 Removing and installing roll-over bar 9966921 Printed in Germany -21, 1999