Installing roll-over protection system · No. Procedure Instructions

911 Carrera (996) Passengerprotection Installing roll-over protection system No. Procedure Instructions 1 Connectingelectrical plug Plug in electrical plug connection of the roll-overbar connection modules. 2 Fitting roll-over bar modules Positionthe roll-overbar modules on the auxiliary frame and fasten them with the M8 x 30 hexagon socket head screws of strength class 10.9. Tightening torque: 33 :t 3 Nm (24 :t 2.0 ftlb.) 3 Fitting cover Position cover of the roll-overprotection system over the auxiliaryframe and fasten it with the 84.2 x 19 oval-headscrews. Press locking levers of the roll-over bar modules outward, and press in the roll-over bar until it engages 4 Triggering roll-over protection Test the roll-overprotection system (functiontest). system with the Porsche Select menu item "Roll-overprotection". Select menu System Tester 2 item "Drive links"in the command line which then appears. Press the key combinationdescribed in the Tester; the roll-overprotection system is triggered. Note: Carry out the function test only with the cover caps removed. 5 Pressingin the roll-overbar Press locking levers outward and press in the roll-over bar until it can be felt to engage. Fit cover flaps on the left and right. 6 Fittingrear wall lining Position rear wall lining on the auxiliaryframe and fasten it on the left and right using the oval-headscrews. 69 72 19 Removing and installing roll-over bar 69 -27 Printed in Germany -21, 1999 9966921