996 Carrera Group 6 Body Equipment, Exterior / PAGE 325
Removing roll-over bar -GT3 · 6 Detach selector sleeves Removethe hexagon socket head screws M8 x 55 out of
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Passenger protection
Removing roll-over bar -GT3
6 Detach selector sleeves Removethe hexagon socket head screws M8 x 55 out of
the selector sleeves. Push the selector sleevesonto the
spring dome support sections.
7 Detach right side of base cage Unscrewthe fastening nuts M8 from the counterplateon
on underbody the vehicle underbodyon the outside. Removehexagon
head bolts M 8 x 25, 8.4 washers out of the base cage.
8. Detach left side of base cage Unscrewthe fastening nuts M8 from the counterplateon
on underbody the vehicle underbodyon the outside. Removehexagon
head bolts M 8 x 25, 8.4 washers out of the base cage.
Pull base cage out of the passengercompartment.
9 Detach right spring dome Unscrew fastening nuts M 10 and pull spring dome support
support section section out of the spring strut mount on the right.
10 Detach left spring dome Unscrew fastening nuts M 10 and pull spring dome support
support section section out of the spring strut mount on the left.
69 72 19 Removing and installing roll-over bar -GT3 69 -39
Printed in Germany -25. 1999 9966935
This is a source reference. Confirm exact model applicability in the original material.