Installing roll-over bar -GT3 · No. Procedure Instructions

911 Carrera (996) Passenger protection Installing roll-over bar -GT3 No. Procedure Instructions 6. Fit left section of roll-over bar Insert the left section (A-pillarsupport) of the left door and screw onto the screwed points of the base cage at the rear with the hexagon head screws M 8 x 25. Tightening torque: 23 Nm (17 ftlb.) 7 Fit left section on the underbody Positionthe section (A-pillarsupport) on the screwed points at the front. Positionthe counterplate on the vehicle underbodyon the outside. Fastenwith the M8 x 25 hexagon-headbolts, 8.4 washers and the M8 fastening nuts. Tightening torque: 23 Nm (17 ftlb.) 8. Fit right section of roll-overbar Insert the right section (A-pillarsupport) of the right door and screw onto the screwed points of the base cage at the rear with the hexagon head screws M 8 x 25. Tightening torque: 23 Nm (17 ftlb.) 9 Fit transverse connection of both Fastenthe transverse connection between both sections sections of the rol~over bar with the M 8 x 12 hexagon socket head bolts. Tightening torque: 23 Nm (17 ftlb.) 10. Fit right sectionon the Positionthe section (A-pillarsupport) on the screwed points at the front. Position the counterplateon the vehicle underbody underbodyon the outside. Fastenwith the M8 x 25 hexagon-headbolts, 8.4 washers and the M8 fastening nuts. Tightening torque: 23 Nm (17 ftlb.) 69 72 19 Removing and installing roll-over bar -GT3 69 -43 Printed in Germany -25, 1999 9966935