Before the removal of the base cage -C-, the bucket seats must be removed! => Rep. Gr. 707219; Removingand · installing bucket sea

911 Carrera (996) Passengerprotection Before the removal of the base cage -C-, the bucket seats must be removed! => Rep. Gr. 707219; Removingand installing bucket seats. => "Assemblyinstructionsfor the rear trim, the floor covering and the closure caps" in 69-45 page 11 Moving right and left sections (A-pillarsup- Undothe lock nut -1- of the adjusting element-2- in the port) -A, 8- to each other to relievethe ten- direction of the arrow -X-. sion and Relievethe tension on the right and left sections (A-pillar disconnectingthe front transverse connec- support) -A, 8- by screwingin abovethe adjusting element tion -2- in the direction of the arrow -Y- into the left section (A- pillar support) -8-. Unscrewthe fastening screws -3- from the retainer plate -4- and the right section (A-pillarsupport)-A-. 2 Detaching right section (A-pillarsupport) -A- Unscrewthe fastening screws -3- from the right section (A- pillar support) -A- and the base cage -C-. 3 Detaching right section -A- on the under- Unscrewthe fastening nuts -5- and the washer -6- from body the right section (A-pillarsupport) -A-. Guidethe section (A-pillarsupport) -A- out of the passen- ger compartmentto the right. 4 Detaching left section -8- on the underbody Unscrewfastening nuts -5- and washer -6- from the left section (A-pillarsupport) -8-. 5 Detaching left section (A-pillarsupport) -8- Unscrewthe fastening screws -3- from the left section (A- pillar support) -8- and from the base cage -C-. Guidethe section (A-pillar)-8- out of the passenger com- partmentto the left. 697219 Removing and installing roll-over bar -GT 3 -as of model year """ 69-45 page 3 Printed in Germany -42,2000 c6972193