No. Procedure Instructions · Installing right section (A-pillarsupport) -A- Guidethe right s

911 Carrera (996) Passengerprotection No. Procedure Instructions Installing right section (A-pillarsupport) -A- Guidethe right section (A-pillarsupport) -A- inwardsfrom the right door. Position on the fastening plate on the vehi- cle floor and screw into place with the washers-6- and the fastening screws -5-. Tighteningtorque: 23 Nm (17 ftlb.) 7 Installing right section -A- on the base cage Screw into place on the screwed points of the base cage -C- -C- with the fastening screws -3-. Tighteningtorque: 23 Nm (17 ftlb.) 8 Installing left section (A-pillarsupport) -B- Guidethe left section (A-pillarsupport) -B- inwardsfrom the left door. Positionon the fastening plate on the vehicle floor and screw into place with the washers -6- and the fastening screws -5-. Tighteningtorque: 23 Nm (17 ftlb.) 9 Installing left section -B- on the base cage Screw into place on the screwed points of the base cage -C- -C- with the fastening screws -3-. Tighteningtorque: 23 Nm (17 ftlb.) 10 Installingthe transverse connection of the Press the adjusting element-2- screwed into the trans- sections (A-pillarsupport) -A, B- at the front verse connectioninto the groove -Z- of the section (A-pillar support)-A-. At the same time, install the retainer plate -4- and screw into place with the fastening screws -3-. Tighteningtorque: 23 Nm (17 ftlb.) ~ "Adjustingthe roll-over bar" in 69-45 page 10 697219 Removing and installing roll-over bar -GT 3 -as of model year """ 69-45 page 9 Printed in Germany -42,2000 c6972193